Aluminum Tank Industries custom aluminum fuel transfer tank toolbox combos are DOT approved to carry gas, diesel, kerosene, methanol, diesel and aviation fuel. Design your custom fuel transfer tank toolbox with the exact dimensions and fuel capacity you need.
Note: DOT approved fuel transfer tanks require a fuel pump to dispense fuel.
Final pricing for custom tanks is based on the size and dimensions of the requested tank and will be provided to you by email after submitting the request a custom tank quote button found on the top right side of the product page for all custom tanks.
Custom tank lead time is approx. 4 to 6 weeks.
Choose from the following Custom Transfer Tank types:
- Rectangular
- L Shaped
- Split L Shaped
Note: mounting tabs add 1.5 inches on each side of the tank.
All ATI refueling transfer tanks come standard with the following:
- Special Permit issued by the US Department of Transportation.
- Legal for gas, diesel, methanol, kerosene, aviation fuel, and other liquids.
- Commercial grade lockable vent / prevent filler cap.
- Fully baffled to reduce movement of contents.
- Two 2 inch NPT reinforced bungs for superior strength.
- A 3/8″npt drain plug,
- Hold down brackets.
- Pressure and leak detection test.
- Clean and free of debris inside and outside of the tank.
- 1 year limited warranty.
- a vent/prevent cap,
- Fully welded baffles to reduce slosh and add strength.
- Designed for use with transfer pumps up to 30 pounds.
These tanks are constructed from rugged diamond plate aluminum and are all available with a black or white powder coated finish.
Aluminum Tank Industries has been granted a special permit from the U.S. Department of Transportation for the legal manufacture, mark and selling of legal aluminum refueling transfer tanks. These tanks can be used for commercial and state applications.
Other Custom Tank Options:
Can I use your refueling transfer tanks for gasoline legally?
Yes, ATI manufactures aluminum refueling transfer tanks to meet and exceed the requirements for gasoline, kerosene, methanol, and diesel. In fact, many government agencies are currently using ATI refueling tanks.
Can I pump from your refueling tank without removing it from the bed of my truck?
Yes it is legal to pump from ATI transfer tanks while still in the bed of a truck whether the tank is being used for private, state, or commercial use.
Do all of your fuel tanks have baffles inside?
Yes, all ATI tanks are baffled to provide strength and support and to reduce fuel sloshing.
Are your tanks tested for leaks?
Yes, all of our tanks are visually inspected and pressure tested for leaks. We also use a video inspection system to check for penetration on the inside of the tank.
Do your fuel tanks come with a warranty?
Yes, all ATI standard duty tanks and toolboxes come with a one year limited warranty. The Severe Series tanks come with a 5 year limited warranty.
Do I need to ground my fuel tanks to the vehicle?
Yes, the tanks need to be grounded at all times. When you install the fuel tank remove the paint from the underside of the truck bed where the tank gets bolted in. That will give a sufficient ground.
How Do I mount my fuel tank?
The fuel tank will come with mounting tabs welded to the tank. You will place the tank in the desired location, check for clearance underneath so you don’t drill into brake lines, fuel lines, etc. Drill and install one bolt, flat washer, lock washer , and nut. Tighten securely. Note: after drilling your mounting hole sand off any paint to bare metal on the bottom side of the truck bed around the bolt hole to ensure a good ground.
Can I get a black powder coat as an option on my fuel tank?
Yes, we offer powder coat as an option. Our durable powder coat fuel tanks are very popular. Our standard color is gloss black but we also offer textures and many other colors.
Can I get a fuel level gauge?
es, fuel gauges are available as an option for all of our auxiliary fuel tanks and refueling tanks.
All custom ATI tanks include a custom drawing that shows the customer requested fuel capacity and requested dimensions.
The ATI custom tank drawings will be sent to customers by email after purchasing the finalized custom tank quote.
Customers may make as many revisions as needed to the custom tank drawing before finalizing the dimensions.
After finalizing the custom tank drawing, your custom tank will be placed into production.
Custom tank orders are non-refundable.
Aluminum Tank Industries, Inc. warrants all products to be free of defects in material or workmanship for a period of 1 year from invoice ship date from our warehouse or purchase date if registered. Severe Series refueling tanks are covered for 5 years. If upon our inspection we deem the item to be defective, Aluminum Tank Industries, Inc. will determine whether to repair or replace the defective item. It is the customers’ responsibility to ship the item to Aluminum Tank Industries, Inc. No cost for labor, installation, or missing contents will be reimbursed. Damages due to shipping and handling, improper installation, abuse – intentional or accidental, or normal wear and tear are not covered by this warranty. Warranty is void if the tank has been altered. Standard duty tanks are designed for use with transfer pumps up to 30 lbs. Installing a pump over 30 lbs on a standard duty tank will void warranty. A Severe Series tank is required if using a transfer pump over 30 lbs.